Ford Assembly Plant Comes Back to Life
Metro Jacksonville takes a look at the restoration and adaptive reuse of a Ford Assembly Plant in California to show the potential of what could be done with our own abandoned, isolated historic industrial facility.
About the Richmond, CA Ford Assembly Plant
Image by Sanfranman59
https://en.wikipedia.org/wiki/Ford_Motor_Company_Assembly_Plant
Richmond's Plant Today: Craneway Pavilion
For more information and images: https://www.craneway.com/
Richmond's Plant Today: Boilerhouse Restaurant
For more information and images: https://www.boilerhouserestaurant.com/
Richmond Ford Assembly Plant aerial
The preservation of the Richmond, CA Ford assembly plant may suggest that there may be a future mix of uses suitable for the restoration of our own Albert Kahn designed masterpiece.
Article by Ennis Davis
Image by Sanfranman59
.JPG){kind=link}
Quote
The Ford Richmond Plant, formally the Ford Motor Company Assembly Plant, in Richmond, California, was the largest assembly plant to be built on the West Coast and its conversion to wartime production during World War II aided the United States' war effort. The plant is part of the Rosie the Riveter/World War II Home Front National Historical Park and is listed on the National Register of Historic Places.
Built in 1930 during the Great Depression, the assembly plant measures nearly 500,000 square feet. The factory was a major stimulant to the local and regional economy and was an important development in Richmond's inner harbor and port plan. Ford became Richmond's third largest employer, behind Standard Oil and the Santa Fe Railroad. It is also an outstanding example of 20th-century industrial architecture designed by architect Albert Kahn, known for his "daylight factory" design, which employed extensive window openings that became his trademark. The main building is composed of a two-story section, a single-story section, a craneway, a boiler house and a shed canopy structure over the railroad track.
To ensure that America prepared for total war by mobilizing all the industrial might of the United States, President Franklin D. Roosevelt banned the production of civilian automobiles during WWII. The Richmond Ford Assembly Plant switched to assembling jeeps and to putting the finishing touches on tanks, half-tracked armored personnel carriers, armored cars and other military vehicles destined for the Pacific Theater. By July 1942, military combat vehicles began flowing into the Richmond Ford plant to get final processing before being transported out the deep-water channel to the war zones. The "Richmond Tank Depot" (only one of three tank depots in the country) as the Ford plant was then called, helped keep American fighting men supplied with up-to-the-minute improvements in their battle equipment. Approximately 49,000 jeeps were assembled and 91,000 other military vehicles were processed here.
In mobilizing the wartime production effort to its full potential, Federal military authorities and private industry began to work closely together on a scale never seen before in American history. This laid the groundwork for what became known as the "military-industrial complex" during the Cold War years. This Assembly Plant was one cog in the mobilization of the "Arsenal of Democracy" and a historic part of what is today's industrial culture of the United States.
After the war, the devastation to the local economy as a result of the closing of the Richmond Shipyards would have been crippling had it not been for the continued production of the Ford Plant. The last Ford was assembled in February 1953, with the plant being closed in 1956 and production transferred to the San Jose Assembly Plant because of the inability to accommodate increased productivity demands.
In 1989, the Loma Prieta earthquake severely damaged the plant. After the earthquake, the City of Richmond repaired and prepared the Ford Assembly building for rehabilitation and selected Orton Development as the developer of the rehabilitation project. In 2008, after the building's rehabilitation was completed, tenants including SunPower Corporation and Mountain Hardware made the building their new home. The craneway of the building is also used for banquets, weddings, and corporate events.
https://en.wikipedia.org/wiki/Ford_Motor_Company_Assembly_Plant
Richmond's Plant Today: Craneway Pavilion
Quote
The 45,000 square foot bay front Craneway Pavilion, the southernmost portion of the complex, now offers the largest and finest event space in the Bay Area, with stunning architecture and breathtaking views.https://www.boilerhouserestaurant.com/
For more information and images: https://www.craneway.com/
Richmond's Plant Today: Boilerhouse Restaurant
Quote
The Boilerhouse restaurant sits adjacent to the Craneway Pavilion and offers seasonal american cuisine, set against a backdrop of original equipment form the Ford Boiler Room.https://www.boilerhouserestaurant.com/
For more information and images: https://www.boilerhouserestaurant.com/
Richmond Ford Assembly Plant aerial
The preservation of the Richmond, CA Ford assembly plant may suggest that there may be a future mix of uses suitable for the restoration of our own Albert Kahn designed masterpiece.
Article by Ennis Davis